1 Grid-Flex | 2 DRC Chain | 3 Gear | 4 Pin type
5 Jaw | 6 Ever-Flex | 7 Rigid | 8 Sleeve
Back to Top
We at HCI SUPPLY carry a complete line of Browning power transmission
products.You can always count on the right coupling for the application when you specify
Browning. Here you have a choice of more than 17, 000 different combinations of sizes and
bores, entirely from stock, for shaft sizes 1/8" to 8 7/8", and applications up
to 18,360 HP. Included are flexible, Ever-Flex, sleeve, rigid, gear and Grid-Flex, was
well as the new DRC chain couplings seen at the top of this page. You can be sure of the
right connection when you choose Browning at HCI SUPPLY.
Back to Top
| Coupling Type |
Bore Sizes |
Maximum HP @
1800 RPM |
| Jaw |
Finished Bore |
1/8" - 2 3/8" |
180.0 |
| Chain |
Finished Bore |
1/2" - 2 3/8" |
708 |
| Bushing Type |
3/8" - 3 3/4" |
601 |
| Minimum Bore |
1/2" - 3 1/2" |
708 |
| Ever-Flex |
Finished Bore |
3/8" - 1 3/4" |
74.6 |
| Bushing Type |
3/8" - 4 1/2" |
476.7 |
| Minimum Bore |
3/8" - 3 1/4" |
203.2 |
| Grid-Flex |
Rough Bore |
1/2 - 7 1/4" |
6385 |
| Finished Bore |
1/2" - 7 |
6385 |
| Bushing Type |
3/8" - 5 1/2" |
5328 |
| Gear |
Rough Bore |
3/4" - 8 7/8" |
1020/100 RPM |
| Pin |
Finished Bore-Die cast |
1/4" - 1 5/8" |
9.6 |
| Finished Bore-Steel |
3/8" - 1 1/4" |
5.5 |
| Bushing Type-Steel |
3/8" - 3 3/4" |
68.7 |
| Sleeve |
Finished Type |
1/4" - 1 3/8" |
--- |
| Bushing Type |
3/8" - 2 11/16" |
-- |
| Rigid |
Bushing Type |
3/8" - 3 3/4" |
-- |
Back to Top
ESO PRODUCTIONS.
Copyright © 1997 HCI SUPPLY, INC. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.
